The solution for closing your window depends and foggy window repair, of course, on the problem encountered and the nature of your window. Here’s what to do for each situation.
Tools you may need:
- A spirit levels
- A plane
- A screwdriver
- A sandpaper sandpaper
- Plane your wooden window
First and foremost, it’s best to attempt your window repair in cool, dry weather. Indeed, heat and humidity can hinder the proper closing of your window. If your wooden window no longer closes because of the heat, 3 solutions are available to you:
Don’t open your windows during the day to prevent them from blowing up, but ventilate them only after the high temperatures have fallen.
Open during the day and wait for the coolness to deflate the wood.
Plane your window if you want to open them during the day and easily close them at night.
In case of planning, here is the procedure to follow:
- First, check that the problem does not come from the strike. Indeed, it may only be a few screws to tighten or readjust;
- Plane the lower part and the upper part of the window;
- Check regularly if the latter closes correctly;
- Check with a spirit level if your window is straight;
If not, lightly sand with sandpaper to even out the assembly.
Adjust Your Window
If you have a PVC window, you can grease its mechanisms to ensure they work well, especially the fixing wings. It may also be that an offset of the hinges prevents the proper closing of your window. You will then have to adjust it correctly. To correctly adjust your equipment, you must locate the origin of the problem. Once the problem has been located, screw certain elements to modify the position or the pressure of the leaves on the frame. Thus, it is possible that your corner brackets need to be tightened. Here’s what to do depending on the situation:
If rubbing on the side, turn the corner bracket screw clockwise to move the sash to the right or counterclockwise to move it to the right. left;
In the event of friction on the upper or lower part of the frame, your leaf may be incorrectly positioned. To adjust it correctly, the adjustment screws clockwise to raise it or counterclockwise to lower it.
Finally, if you feel air near your window or if the handle of the latter is difficult to operate, it may be a compression defect of the opening on the frame.
If this is the case, you will need to reduce or increase the pressure of the leaf on the frame. To do this, turn the mushroom head studs clockwise to raise the pressure and counterclockwise to lower it. For more info go on Apex Window Werks.